Denver Instrument Tl-series Instructions d'exploitation télécharger pdf (Page 13)

13

Counting

With the Counting program you

can determine a number of parts,

each having approximately the same

weight. The weight of 10, 20, 50 or

100 pieces is stored as the reference

sample quantity first, and the next

load on the balance is then calculated

as a number of pieces having the

same weight, based on this reference

value.

Available reference sample quantities:

10 pieces

20 pieces

50 pieces

100 pieces

Factory default:

Reference sample quantity: 10 pieces

Activating the counting application

and setting the reference sample

quantity:

1. Press I/O to switch the instrument

on.

2. A brief self-test is performed, fol-

lowed by “- -” indicating that the

balance is being zeroed.

3. Press and hold the Print/Menu key

for three seconds or until “Unit” is

displayed.

4. Press the Print/Menu key twice;

“Count” is displayed.

5. Press the arrow key to activate the

counting mode.

6. Select the reference sample

quantity by pressing the arrow key

repeatedly until the desired quanti-

ty is displayed. The display shows:

10, 20, 50, 100, and P100.0 in turn.

7. Press the Zero key to confirm.

8. Remove all items from the pan

and press the Zero key to tare the

balance.

9. Place the reference quantity (e.g.,

10 pieces) on the balance and wait

for the readout to stabilize (the

weight unit is displayed).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 48 49

Commentaires sur ces manuels

Pas de commentaire