Denver Instrument Tl-series Spécifications télécharger pdf (Page 12)

Advance Features through Menu

Codes

Several advanced balance operations can be changed through menu

codes. Select the desired codes from the below list. Then follow the steps

the change the menu codes.

Special key functions in for menu code operation:

Zero- To enter/leave menu code settings, increased a number by one with

each press

Print- Moves to the next of three number of a code

To Change Menu Codes:

1. Press power key to turn balance off

2. Press power key to turn the balance back on. While all segments are dis-

played, press zero key once. After self-test, screen will have 1 on the left

side of display

3. Press zero key to increase the number on display to desired value

4. Press print for APX to move to the 2nd number of the code

5. Press zero key to increase the second number on display to desired

value

6. Press print for APX to move to the 3nd number of the code (when you

move to the third number, the previously set menu code will appear)

7. Press zero key to increase the third number on display to desired value

8. Hold down print for APX until “o” appears on the APX after the set

code. This confirms and stores the new code.

9. Press zero for more than 2 seconds to store the new menu code setting.

Menu Codes:

Filter Selection

1 1 1 Very stable conditions

1 1 2 Stable conditions (default)

1 1 3 Unstable conditions

1 1 4 Very unstable conditions

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Pas de commentaire

Denver Instrument Tl-series Spécifications Page 12